Industrial DTM Epoxy Mastic (9100 System)
- Four activators
are available for a variety of
conditions:
- Two-component
high solids polyamine converted epoxy
- Direct-to-metal
and tightly adhered rusted metal
- Superior
long-term solvent, chemical and abrasion
resistance
- Maximum corrosion
protection
- Tough film for
excellent durability, dries to 5-8 mils
- Convenient 1:1
mixing ratio of base and activator
- Provides the wear
and abrasion-resistance of multi-coat
epoxy coatings
- In severe
industrial environments or over
abrasive-blasted surfaces, a second coat
is required for optimal protection
- USDA acceptable¹
and Agriculture Canada approved
Industrial Low VOC DTM Epoxy Mastic (Low VOC
9100 System)
- Available
activator:
- A two-component
high solids, next generation polyamine
converted epoxy
- Our best
polyamine converted epoxy coating for
unsurpassed performance
- 250 g/L epoxy
mastic coating for severe environments
- Direct-to-metal
and tightly adhered rusted metal
- Unsurpassed long
term corrosion protection
- Superior long
term solvent and chemical resistance
- Ultimate abrasion
resistance
- Provides the
service life of multi-coat systems
- Convenient 1:1
mixing ratio for the base and activator
- No thinning
required for spray application
- Excellent direct
impact resistance
- USDA acceptable¹
and Agriculture Canada approved
¹ Can be used in USDA facilities based on
FSIS Directive 11,000.4 (Rev. 1), November
24, 1995.
Tint bases also available for custom
colors. |
