9800 System DTM High Build Urethane Mastic

• A two-component high solids, high build direct-to-metal urethane
• Ultimate protection of metal (use a Rust-Oleum Epoxy primer for severe environments)
• Superior color and gloss retention for excellent long-term appearance
• Excellent adhesion and maximum hiding power
• Low temperature cure down to 40° F (5° C)
• Excellent sag resistance (can apply at high film builds, 3-5 mils rec. DFT)
• No thinning is required for convenient spray application
• Use accelerator to speed drying time
• USDA acceptable¹ except 9815419 Alumi-NON®.

¹ Can be used in USDA facilities based on FSIS Directive 11,000.4 (Rev. 1), November 24, 1995.

Tint bases also available for custom colors.