| When splashes and spills occur... step up safety as you beautify busy areas. Guard against slips and falls with BriteCast™, a decorative, heavy-duty topping for concrete protection. This three-component, tweed-look formulation of epoxy resin polymer, polyamine curative and brightly colored quartz aggregate blend together to protect concrete and the people around you.
- Choice of Thickness (1/16" thick single-broadcast, 1/8" thick double-broadcast, or 1/4" thick with 3/16" FlorClad Primer and FlorClad HD base) adapts to your needs
- Rapid Turnaround Minimizes Downtime with foot traffic in 16-24 hours, full mechanical use in 24-48 hours, and chemical exposure in 4 days
- Superior Compressive Strength with twice the load-carrying capacity of concrete
- Chemical Resistance with splash-and-spill protection against many acids, alkalis and solvents
- Slip Resistance with a high percentage of mineral aggregate enhances safety
- Fire Resistance with self-extinguishing characteristics enhances safety
- Minimal Maintenance with routine mopping or washdown; time-consuming upkeep is greatly reduced
- Seamless Construction with non-porous, high-density composition resists bacterial growth and corrosion
- VOC Compliance with virtually no odor
Typical Applications:
- bathrooms
- kitchens
- cafeterias
- schools
- light manufacturing
- locker rooms
- pharmaceutical areas
- laboratories
- offices
- showrooms
- hospitals
- restaurants
- corridors
Application Data:
| Components: |
Epoxy Resin Polymer, Polyamine Curative, Quartz Aggregate |
| Thickness: |
1/16" - 1/4" |
| Turnaround Time: |
16-24 hours (foot); 24-48 hours (full); 4 days (chemical) |
| Primer: |
Penetrating Prime and Seal Primer |
| Sealer: |
BriteCast Sealer |
| Texture: |
Smooth, High or Low profile, Orange Peel |
| Physical Strength Properties |
| Compressive Strength (ASTM C 579) |
10,000 psi |
| Flexural Strength (ASTM C 580) |
3,150 psi |
| Modulus of Elasticity (ASTM C 580) |
5.0 x 105 psi |
| Tensile Strength (ASTM C 307) |
2,000 psi |
| Bond Strength to Concrete (ASTM D 4541) |
Exceeds tensile strength of concrete (Concrete fails first) |
| Taber Abrasion (ASTM D 4060 CS 17 wheels) |
Loss/1000 cycles=30 mg |
| Water Absorption (ASTM C 413) |
0.10% maximum |
| Linear Shrinkage (ASTM C 531) |
0.05% maximum |
| Linear Coefficient of Thermal Expansion (ASTM C 531) |
3.4 x 10-5 in/in/°F |
| Flammability (ASTM D 635) |
Self Extinguishing |
| Impact Resistance (Mil-D-3134J) |
Satisfactory per 3.15 |
| Coefficient of Friction (ASTM C 1028) |
0.6 minimum |
| Hardness, Shore D (ASTM D 2240) |
85 |
| Porosity with No Sealer Coat (NACE Stand TM0174) |
0.00 |
| Suitable for Food & Beverage Industries |
Yes |
|
