|
Foot traffic, food
preparation, constant activity... these are
everyday elements in a busy facility.
VinylCast™ decorative
flooring protects concrete from corrosion
with an attractive, easy-to-clean system.
This durable, terrazzo-look coating brings
you style and protection at a fraction of
the expected cost. A three-component
formulation of epoxy resin polymer,
polyamine curative and vinyl chips provides
impact resistance and easy maintenance.
- Choice of
Application (30 mil Sparse Broadcast
System, 1/16" Full Broadcast System, or
1/8" topping consisting of two 1/16"
applications) adapts to your needs
- Rapid
Turnaround Minimizes Downtime with
foot traffic in 16-24 hours, full
mechanical use in 24-48 hours, and
chemical exposure in 4 days
- Superior
Compressive Strength with twice the
load-carrying capacity of uncoated
concrete
- Chemical
Resistance with splash-and-spill
protection against many acids, alkalis
and solvents
- Fire
Resistance with self-extinguishing
characteristics enhances safety
- Seamless
Construction with non-porous,
high-density composition resists
corrosion and bacterial growth
- Minimal
Maintenance with routine mopping or
washdown; time-consuming upkeep is
greatly reduced
- VOC Compliance
and low odor for use in all regulated
areas meets safety standards
Typical
Applications:
- bathrooms
- kitchens
- cafeterias
- schools
- light
manufacturing
- locker rooms
- pharmaceutical
areas
- laboratories
- offices
- showrooms
- hospitals
- restaurants
- corridors
Application Data:
|
Components: |
Epoxy Resin
Polymer, Polyamine Curative, Vinyl
Chip Media |
|
Thickness: |
1/16" - 1/8" |
|
Turnaround
Time: |
16-24 hours
(foot); 24-48 hours (full); 4 days
(chemical) |
|
Primer: |
Penetrating Prime
and Seal Primer and VinylCast
basecoat (OverKrete E-100 S or
OverKrete Xtra E-100 S) |
|
Sealer/Texture: |
Orange Peel -
OverKrete Xtra E-100 OP Clear
Smooth - BriteCast Sealer or
OverKrete Xtra E-100 S Clear |
|
Physical
Strength Properties |
|
Compressive
Strength (ASTM C 579) |
8,300 psi |
|
Flexural Strength
(ASTM C 580) |
9,600 psi |
|
Modulus of
Elasticity (ASTM C 580) |
3.7 x 105
psi |
|
Tensile Strength
(ASTM C 307) |
3,500 psi |
|
Bond Strength to
Concrete (ASTM D 4541) |
Exceeds tensile
strength of concrete (Concrete fails
first) |
|
Taber Abrasion
(ASTM D 4060 CS 17 wheels) |
Loss/1000
cycles=30 mg |
|
Flammability
(ASTM D 635) |
Self
Extinguishing |
|
Hardness, Shore D
(ASTM D 2240) |
85 |
|
Suitable for Food
& Beverage Industries |
Yes |
|
